performance:
The filter is made of high quality stainless steel, the inner tube is made of stainless steel sheet punching forming filter tube, tightly equipped with wire mesh structure, joint connection, convenient for disassembly and cleaning, suitable for filtration of beer and CIP cleaning liquid, which can be selected according to the actual use of the user. 20-100 mesh stainless steel wire mesh.
A pipe filter is a device that removes solid impurities during pipe transport of liquids. When the liquid flows through the filter, the impurities are filtered out to protect the pump, compressor, instrument and other equipment from working properly. When it is necessary to clean, remove the detachable filter cartridge, remove the filtered impurities, and reload it. It is very convenient to use and maintain.
Method：
Selection principle：
1. Import and export routes:
In principle, the inlet and outlet diameter of the filter should not be less than the inlet diameter of the matching pump, which is generally consistent with the diameter of the inlet pipe.
2. Nominal pressure:
The pressure rating of the filter is determined by the highest pressure that may occur in the filter line.
3, the choice of the number of holes:
The main consideration is the particle size of the impurities to be intercepted, depending on the process requirements of the media process. The size of the screen that can be intercepted by various specifications of the screen can be found in the table below.
4, filter material:
The material of the filter is generally chosen to be the same as the material of the connected process pipe. For different service conditions, consider a filter made of cast iron, carbon steel, low alloy steel or stainless steel.
5, filter resistance loss calculation
Water filter, the pressure loss is 0.52~1.2kpa at the general rated flow rate
Types of
Pipeline filter comparison types are commonly used in straight pipe filters, T-type pipe filters, Y-type pipe filters, double-switching filters, and basket filters.
Straight through
The design structure is simple and the floor space is small; the transition precision of the stainless steel filter is smaller than the conventional one; the filter medium has high strength, is not easy to be broken, and has low cost; long service life, no need to be replaced; automatic high pressure backwashing, high efficiency; low water consumption for cleaning; Energy saving; small footprint; high degree of automation, remote control; straight-through pipeline filter can only be used according to the rated voltage / frequency indicated on the nameplate; the filter should be maintained at regular intervals. Before cleaning and maintenance, please be sure to disconnect the self-cleaning filter power supply; please make sure that the wire plug is not wet when it is cleaned or it must be wiped dry before reconnecting the power; do not unplug the power cord with wet hands; The pipeline filter is only used in the indoor aquarium; if the filter is damaged, especially if the power cord is damaged, please make sure that the self-cleaning filter works in the correct water level, the filter can not be used without water; Disassemble or repair to avoid danger or damage to the body. Repairs should be carried out by professionals.
Basket
The filter is a small device that removes a small amount of solid particles from the liquid, which protects the normal operation of the device. When the fluid enters the filter cartridge with a certain size filter, the impurities are blocked, and the clean filtrate is discharged from the filter outlet. When cleaning is required, the detachable filter cartridge can be taken out and reloaded after processing, so that it is extremely convenient to use and maintain.
The filter is an indispensable pipe accessory in industrial production. It can be installed on the pipeline to filter out solid impurities in the fluid, ensure the normal operation of the pipeline equipment system, and make the fluid more pure and obtain the ideal industrial product. After using it for a period of time, the upper cover is opened, and the filter net like a basket type is taken out, and once it is washed, it can be restored as new. Therefore, it has been widely used in petroleum, chemical, pharmaceutical, food and other industries, and is favored by users.
T type
The filter is made of high quality stainless steel, the inner tube is made of stainless steel sheet punching forming filter tube, tightly equipped with wire mesh structure, joint connection, convenient for disassembly and cleaning, suitable for filtration of beer and CIP cleaning liquid, which can be selected according to the actual use of the user. 20-100 mesh stainless steel wire mesh.
A pipe filter is a device that removes solid impurities during pipe transport of liquids. When the liquid flows through the filter, the impurities are filtered out to protect the pump, compressor, instrument and other equipment from working properly. When it is necessary to clean, remove the detachable filter cartridge, remove the filtered impurities, and reload it. It is very convenient to use and maintain.
The device has the advantages of small land occupation, small head loss, no chemical addition, simple operation, long service life, convenient maintenance and repair, etc. It can be widely used in various open and closed hot and cold water systems to avoid system blockage and lightening. The pump is worn and the ideal equipment to ensure the normal operation of the system.
Y type
The Y-filter is a filtration device that is required for the use of hydraulic control valves and precision, easily clogged mechanical products. It is an indispensable device for the pipeline series of conveying medium. It is usually installed at the inlet end of equipment such as hydraulic control valve, pressure reducing valve, pressure relief valve and fixed water level valve to eliminate impurities in the medium and prevent particulate impurities from entering. Channels that create wall plugs to protect the fittings on the equipment piping from wear and blockage
Double
1): Introduction to parallel filter:
Inflow method: jacking in or side in
Filtration area (square): 0.5*2
Maximum flow (m3/h): 80
Filter volume: (litre): 32*2
Design pressure (MPa): 10
Standard connection (import and export): 2" international flange
Material: SUS304, SUS316, SUS316L.
2): Introduction to the series filter:
Inflow method: jacking in or side in
Filtration area (square): 0.5
Maximum flow (m3/h): 40
Filter volume: (litre): 32
Design pressure (MPa): 10
Standard connection (import and export): 2" international flange
Material: SUS304, SUS316, SUS316L.