In the daily use of large flow water filter, good protection is one of the necessary measures, its disinfection method and protection measures for its future use is very important.
The protection method of large flow water filter element is as follows:
When the large flow water filter element can not meet the planned flow, open the filter after shutdown, take out the large flow water filter element from the filter, wash the surface dirt on the faucet, then soak it in 4% hydrochloric acid for 24 hours, then soak it in 4% sodium hydroxide for 24 hours, then take it out, and then rinse it on the faucet;
Check whether the O-ring is damaged. If it is damaged, please replace the O-ring first, and then install the large flow water filter element according to the method of large flow water filter element device, and then wash it under the pressure of less than 0.1MPa.
If the large flow water filter element needs to be shut down for a long time after use, please take out the large flow water filter element, clean and dry it according to the method mentioned above, and keep it properly, and then use it again when starting up next time.