+86-373-5471699

Installation Sequence And Precautions For Air Compressor Filter

Oct 17, 2024

Installation Sequence And Precautions For Air Compressor Filter

 

The installation sequence of the air compressor filter element is as follows:
1. Preparation: Ensure that the air compressor has been shut down, close the air compressor outlet, open the drain valve, and confirm that there is no pressure in the system.


2. External models: Simply replace the oil and gas separator.


3. Built in models:
(1) Turn off the air compressor and confirm that there is no pressure in the system.
(2) Remove the pipeline above the oil and gas tank, and at the same time, remove the pipeline from the pressure maintenance valve outlet to the cooler.
(3) Remove the oil return pipe.
(4) Remove the fixing bolts on the cover of the oil and gas drum, and move the drum cover away.
(5) Remove the old oil and gas separator and replace it with a new one.


During the installation process, the following points should be noted:
1. Ensure that all connections are tightly fitted to ensure safe operation and effective use.


2. Avoid directly placing the filter element in oil for cleaning. Use a brush to gently remove dust and dirt.


3. Prevent water from entering the filter element to avoid affecting its waterproof effect and service life.


By following the above steps and precautions, the correct installation and effective use of the air compressor filter element can be ensured.

Send Inquiry