The gearbox filter element is divided into two levels: the main filter element is made of 10 micron imported glass fiber composite filter paper material, and the secondary filter element is made of 50 micron stainless steel metal mesh material with high filtration accuracy. It is made of single or multiple layers of metal mesh and filter material, and the number of layers and mesh composition depends on different usage conditions and purposes. It has high concentricity, high pressure resistance, good straightness, stainless steel material, and no burrs, ensuring a long service life.
Introduction to Four Advantages of Wind Power Hydraulic Filter Element
1. Using strong hydrophobic and oil repellent fiber filter materials from the United States, and using a skeleton with good permeability and high strength to reduce the resistance caused by passing.
2. Using German fine perforated sponge, it can effectively prevent oil and water from being carried away by high-speed airflow, allowing small oil droplets passing by to accumulate at the bottom of the filter sponge and discharge towards the bottom of the filter container.
3. The connection point between the filter element and the filter shell adopts a reliable sealing ring, ensuring that the airflow is not short circuited and preventing impurities from directly entering the downstream without passing through the filter element.
4. The filter element adopts a corrosion-resistant reinforced nylon end cover and a corrosion-resistant filter element skeleton, which can be used in harsh working conditions.