一，Ultra-low diffusion flow polyethersulfone sterilization grade filter
Main features:
1. Ultra-low diffusion flow
2, good hydrophilicity, easy to wet
3. PH Applicable range 1-14
4, asymmetric membrane structure
5. Very low protein non-specific adsorption compared with similar products
6, the filter element is numbered separately, the product can be traced
Application：
Higher pH and lower injection filtration
Sterilization filtration of water for injection
Sterilization filtration of cleaning solution and disinfectant
Sterilization filtration of high viscosity products (eg eye drops)
Sterilization filtration of freeze-dried powder injection
Buffer and medium sterilization filtration
Sterilization filtration of blood products and vaccines
Removal of mycoplasma in serum and cell culture
二，Low diffusion flow, hydrophilic PTFE sterilization grade filter
Main features:
1, excellent hydrophilicity
2, very high porosity, high throughput
3, excellent chemical stability and high temperature resistance
4, no need to pre-wet can be used directly
5, extensive chemical compatibility
6, can withstand dozens of repeated high temperature steam sterilization
Application：
Clarification and sterilization filtration of strong oxidant liquid
Clarification and sterilization filtration of highly corrosive liquids
Clarification and sterilization filtration of strong protic organic solvents
Sterilization filtration of freeze-dried powder injection
Sterilization filtration of materials with high water-soluble ratio of antibiotics
三，High precision polypropylene deep filter
Main features:
1. Multi-layer polypropylene with increasing filtration efficiency as a filter medium
2. The filter core has a large dust holding capacity, and the rejection rate of the particles is the highest among similar products.
3, the initial pressure difference is low, the flow rate is large, and the service life is several times that of similar products.
4, all polypropylene structure, no leakage, in line with CFDA standards
四，High-strength, long-life, hydrophobic PTFE sterilizing filter
Main features:
1. Complete verification text to ensure integrity and reliability
2, high flow rate, low pressure difference
3. Ultra low extractables and extracts
4, steam-resistant, long service life, providing low-cost filtration solutions
五，High-throughput, low-adsorption polyethersulfone sterilization grade filter
Main features:
1. Asymmetric membrane structure
2. Very low protein non-specific adsorption compared with similar products
3, the filter has a very high flow rate and total flux
六，High-throughput, hydrophilic PTFE sterilizing grade filter
Main features:
1, excellent hydrophilicity
2, very high porosity, high throughput
3, excellent chemical stability and high temperature resistance
4, no need to pre-wet can be used directly
5, extensive chemical compatibility
6, ultra low extract
七，High efficiency nylon sterilization filter
Main features:
1, hydrophilic, easy to wet
2, good chemical compatibility, compatible with most chemical reagents
3, uniform pore size and strong flexibility, can ensure effective retention capacity to meet the requirements of fine filtration applications
4, no fiber shedding, the release is extremely low, fully in line with CFDA requirements
八，High temperature sterilization polyethersulfone sterilization grade filter
Main features:
1. Highly asymmetric membrane pore structure
2, with high dirt content, to ensure the long life of the filter
3, excellent hydrophilicity, easy to be wetted by water
4, high throughput, to ensure the economical use of the filter
5, excellent resistance to steam sterilization
九，The most corrosion-resistant full PTFE filter
Main features:
1. Perfluoropolytetrafluoroethylene structure
2, has excellent chemical compatibility
3, excellent high temperature and high pressure resistance
4, low pressure difference, low leachate
5, not suitable for strong alkali filtration
6, not steam sterilization
