Hydraulic Oil Filter 01.E210.10VG.16.S.P
Replace Hydraulic Oil Filter 01.E210.10VG.16.S.P used to protect specific components in the hydraulic system. It is installed upstream of the protection element in the medium pressure pipeline to filter out solid particles and gelatinous substances in the working medium, effectively control the pollution degree of the working medium and make the components work normally.
| Part number: | 01.E210.10VG.16.S.P |
| OD: | 102mm |
| Height: | 312mm |
| Filtration rate: | 5μm |
| Media: | Glassfiber |
2. 2 - 5um for high precision,10-15um for medium accuracy, 15-25um for low precision.
3.It is the solidity filter, increasing the filter area, the general part of the filter layer folded into corrugated, hydraulic filter pleated height is generally 20 mm or less .
4.Hydraulic filter to withstand the pressure difference is generally 0.35-0.4MPa. But for the special filter, requiring high-pressure, the highest requirements to bear 32MPa, or even 42MPa equivalent system pressure.
5.The maximum temperature, and some requirements to 135 ºC
Related Products:
Hot Tags: Hydraulic Oil Filter 01.E210.10VG.16.S.P manufacturers, buy Hydraulic Oil Filter 01.E210.10VG.16.S.P, Argo Cartridge Filter, EPE Hydraulic Filter, EPE Oil Filter Element 01E 450 10VG HR E P, Internormen Hydraulic Oil Filter, Internormen Oil Filter 300148, Replace Argo Oil Filter Element V3062306
Send Inquiry
