Oil Gas Separation Filter Cartridge

Specifications:

working principle:

Precautions for replacing the filter:

When the pressure difference between the two ends of the oil and gas separation filter is 0.15MPa, it should be replaced; when the pressure difference is 0, it indicates that the filter element is faulty or the airflow has been short-circuited. At this time, the filter element is also replaced when applicable. Generally, the replacement time is 3000~4000 hours. If the environment is poor, the usage time will be shortened.

When installing the return line, it must be ensured that the tube is inserted into the bottom of the filter element. Replace the oil separator to pay attention to the electrostatic discharge. Connect the inner metal mesh to the oil drum casing.

Hot Tags: oil gas separation filter cartridge manufacturers, buy oil gas separation filter cartridge, Stainless Wire Mesh Natural Gas Filter, Oil Gas Separator Filters, Stainless Steel Gas Filters, Oil And Gas Separator Filters, Coalescing Filter, Oil And Gas Separation Filter