Air Filter is to remove a small amount of solid particles in the air, the filter air in the tiny dust impurities or odor of gas, can protect the equipment in a clean environment to work or to ensure that the living space of the air clean, when the fluid into the home A certain filter mesh filter, the impurities or odor is blocked, and clean the flow of material through the filter out.
Air filter is an industrial supplies, the general effect of the filter is about 3 months have to be replaced once, the effect of the filter for the 6 or so replacement, efficient filter 1 year or so to replace, so the product consumption costs comparison Big.
Early effect filter, the price is relatively cheap, in order to prevent excessive fouling, the impact of the back of the filter and high efficiency filter life, the best change. In the efficiency of the filter to use the differential pressure meter to monitor the pressure on both sides of the wind surface, the best alarm device, to the end of the resistance to the police, to remind the replacement of the filter.
In addition, high efficiency filter, choose a good filter material can have the effect of improving the service life, increase the dust capacity, bad filter, air volume is slightly larger, it is easy to blow. Replace the efficient but also stop production, human and material resources, doing down is not worthwhile. So the beginning of the device, try to choose a good high efficiency filter, replace the maintenance of the front air filter device.
First, the product features and uses
Ordinary high efficiency air filter is a clean system in an air filtration equipment, it can air particle size of 0.3μm particle filtration efficiency of 99.99% or more. Mainly used in electronics, medicine, food, precision instruments and other high cleanliness of the industry. Its transport, installation, etc. must be strictly in accordance with the requirements to ensure that the filter can be correct and reasonable use.
Second, handling and storage
1. During handling, it must be carried in the diagonal direction of the box. The carrier should be careful to prevent the filter from sliding during handling and damaging the screen.
2. Can not have more than 20kg of external force on the filter. In the handling, hands and other objects must not collision filter, such as accidentally touch the filter, even if the visual damage, should also scan again.
3. Storage location should be warm, poor wetness, clean, dry and well ventilated system environment.
Storage for more than three years should be re-tested.
Third, the installation and adjustment
1. The filter should be installed in normal temperature, atmospheric pressure, often wet environment. If the working conditions are bad, will inevitably shorten the life of the filter, or even after installation can not work properly. Before installation should first check the appearance of the filter deformation, damage, filter with or without damage, such as the above situation should be promptly contact with the company.
2. Be sure to pay attention to the seal between the filter and the mounting frame (or case) during installation. In order to ensure the sealing performance of the filter and the installation box, it is recommended to use the gasket provided by our company.
3. Replace the filter must be static pressure box or air duct around the wall thoroughly wipe clean, so as to avoid the walls of the rust and dust particles fall on the filter, causing damage to the filter.
4. When installing, be sure to pay attention to the direction of the airflow of the filter and install it according to the filter label. The direction of the arrow is the outlet of the filter.
5. Installed with the hand around the frame, slowly moved into the air outlet, can not hand and head to withstand the filter, so as not to filter the fracture, the impact of filtration efficiency installed with the hand holding the border around, slowly moved Outlet, can not hand and head to withstand the filter, so as not to filter material fracture, affecting the filtration efficiency.