A lot of Air Filter consumers do not understand the maintenance of the Air Filter, so often used for a period of time, it makes the performance of the Air Filter greatly reduced, the following Xiaobian to teach you how to do the maintenance of the Air Filter:
1, the core of the Air Filter is the Air Filter core, the Air Filter box from the Air Filter box and stainless steel wire mesh composition, stainless steel wire mesh is a consumable parts, so consumers in the daily use of the Air Filter must be a special protection;
2, when the Air Filter work for some time, the Air Filter core precipitated a certain amount of impurities, then the pressure drop increases, the flow rate will decline, the need to promptly remove the Air Filter core impurities, cleaning impurities, pay special attention to the Air Filter Stainless steel wire mesh can not be deformed or damaged, otherwise, and then loaded up the Air Filter, the purity of the Air Filter after the design requirements, compressors, pumps, meters and other equipment will be destroyed;
3, if found stainless steel wire mesh deformation or damage, need to be replaced immediately.
4, some precision Air Filter, can not be used repeatedly, such as bag Air Filter, polypropylene Air Filter and so on.
First, the product features and uses
Ordinary high efficiency air Air Filter is a clean system in an air filtration equipment, it can air particle size of 0.3μm particle filtration efficiency of 99.99% or more. Mainly used in electronics, medicine, food, precision instruments and other high cleanliness of the industry. Its transport, installation, etc. must be strictly in accordance with the requirements to ensure that the Air Filter can be correct and reasonable use.
Second, handling and storage
1. During handling, it must be carried in the diagonal direction of the box. The carrier should be careful to prevent the Air Filter from sliding during handling and damaging the screen.
2. Can not have more than 20kg of external force on the Air Filter. In the handling, hands and other objects must not collision Air Filter, such as accidentally touch the Air Filter, even if the visual damage, should also scan again.
3. Storage location should be warm, poor wetness, clean, dry and well ventilated system environment.
Storage for more than three years should be re-tested.
Third, the installation and adjustment
1. The Air Filter should be installed in normal temperature, atmospheric pressure, often wet environment. If the working conditions are bad, will inevitably shorten the life of the Air Filter, or even after installation can not work properly. Before installation should first check the appearance of the Air Filter deformation, damage, Air Filter with or without damage, such as the above situation should be promptly contact with the company.
2. Be sure to pay attention to the seal between the Air Filter and the mounting frame (or case) during installation. In order to ensure the sealing performance of the Air Filter and the installation box, it is recommended to use the gasket provided by our company.
3. Replace the Air Filter must be static pressure box or air duct around the wall thoroughly wipe clean, so as to avoid the walls of the rust and dust particles fall on the Air Filter, causing damage to the Air Filter.
4. When installing, be sure to pay attention to the direction of the airflow of the Air Filter and install it according to the Air Filter label. The direction of the arrow is the outlet of the Air Filter.
5. Installed with the hand around the border, slowly moved into the air outlet, can not hand and head to withstand the Air Filter, so as not to Air Filter material fracture, affecting the filtration efficiency
Installed with a hand around the border, slowly moved into the air outlet, can not hand and head to withstand the Air Filter, so as not to Air Filter the fracture, affecting the efficiency of filtration.
Fourth, the service life and maintenance
1. In general, when the end resistance of the Air Filter is twice the initial resistance, it should be replaced.
2. The cleanliness of the clean area should be regularly checked, the data should be tested to meet the design requirements of clean rooms. If the request is not met, the Air Filter should be scanned and the system will be checked for sealing. If the Air Filter leaks, it should be filled or replaced. When the system is used for a long period of time, the clean room should be scanned.
3. To extend the life of the Air Filter, the operation should always change the coarse Air Filter.