Although the equipment is reliable and durable, the hydraulic oil filter element needs to be replaced after long-term use.
When replacing the hydraulic oil filter element, the method must be correct, so as to ensure that the parts of the equipment are not damaged, and at the same time, to prevent the filter element from being damaged. When replacing the filter element, it is inevitable that some liquid will flow out. Therefore, before the replacement, prepare the items for wiping and receiving the liquid in advance, and turn off the power supply and some switches in other parts to ensure the safety of the entire operation process.
How to replace the hydraulic oil filter element at the end of its life?
Call the valve to discharge the remaining substances. After it is drained, use a special tool to open the filter element housing and take out the old hydraulic oil filter element, install a new and consistent filter element, and smear an appropriate amount of lubricating oil on the filter housing. After the coil is placed in the corresponding position, tighten the filter housing and turn on the relevant power switch to see if it can operate normally.