Stainless Steel Activated Carbon Filter

Activated carbon filters through the carbon bed to finish filter. The activated carbon bed is composed of many particles of microporous and enormous specific surface with strong physical adsorption capacity. Water flow through the carbon bed, organic pollutants in water was adsorbed by activated carbon effectively.

Addition, activated carbon of non-crystalline part on the surface has some of the oxygen tube to allow the water through the carbon bed of organic pollutants by activated carbon adsorption. Activated carbon filters are commonly used in water treatment equipment, as a water treatment system to ensure pre-treatment to be effective before desalination to assure equipment life, improve water quality, pollution prevention, particularly after the class is to prevent the reverse osmosis membrane, ion exchange resins, etc. Free oxygen toxicity than pollution. The available method of backwashing restore its adsorption capacity. The reasonable structure, easy to use, applicable to a variety of higher quality

Specifications
1. This treatment system has good filtration effect
2. Convenient operation
3. High efficiency and low cost
Quarz Sand Filter in this equipment can effectively remove suspended
Particls, impurities in raw water, which making output water meet customers

Technic parameter:
1. Filter speed: 11-15m3
2. Back flushing time: 4-10min
3. Regenerate time: 15-30min
4. Inlet water tuibidity: <=10mg/L
5. Outlet water ruibidity: <=3mg/L
6. Wipe off rate: 90-96%
7. Back flushing intension: 12-18L/S. M2