The method of cleaning the microporous folding filter mainly includes the following steps:
1. Preliminary cleaning: First, rinse the surface of the filter element with clean water to remove dirt. This step can be performed using a faucet or sprayer.
2. Soaking and cleaning: Next, soak the filter element in neutral cleaner or specialized filter element cleaner. The ratio of cleaning agents should be carried out according to the instructions in the manual. Suggest soaking for no more than 30 minutes.
3. Thoroughly rinse: After removing the filter element, rinse it thoroughly with clean water to ensure that any residual cleaning agents and impurities on the surface of the filter element are completely removed.
4. Drying treatment: Finally, place the filter element in a ventilated and dry place to dry, and it is recommended to avoid direct sunlight exposure.
It should be noted that different filter materials and models may require different cleaning methods. Therefore, it is recommended to carefully read the filter user manual or consult with the supplier for more accurate cleaning guidance. In addition, if there is damage or deformation on the surface of the filter element, it should be considered to replace it with a new one