TF Tank Mounted Suction Filter
Introduction：
The TF-series filter can be installed on the top,at the side or in the bottom of the tank there is a check valve inside the filter.during maintenance,when filter element is withdrawn for washing,the check valve will close automatically to stop oil flowing out from the tank.
A vacuum indicator in the filter gives signals when the pressure drop across the element reaches 0.018MPa showing that the filter shall be cleaned,if no maintenance is done,as the pressure drop rises to 0.02MPa,the by-pass valve will open to allow oil flowing into pump.
Feature：
Easy to install and connect,Simplify system lines.
Set self sealing valve,It is convenient to replace and clean the filter.
With filter core pollution sender and oil passage valve,Improve the reliability of the hydraulic system.
Specifications:
| Type | TF Tank Mounted Suction Filter |
| Flow(L/min) | 160 |
| Filtration rate(μm) | 80,100,180 |
| Dia(mm) | 40 |
| Weight(kg) | 1.75 |
packing：
About filter element：
production equipment：
Hot Tags: tf tank mounted suction filter manufacturers, buy tf tank mounted suction filter, TF Tank Mounted Suction Filter, TF Suction Filter
Send Inquiry
